EN4 STEPS TO DIAL IN ETAP AXS
Guidelines For Outstanding Performance
Getting the most out of your eTap AXS groupset is simple. Just follow these four tips that cover the most critical items required for a dialed setup.
1. LINE IT UP
Front Derailleur
Use the lines on the front derailleur cage to set your height and alignment relative to the big ring. Watch How To Video
Rear Derailleur
A) Check your rear derailleur hanger alignment. Watch How To Video
B) Shift the rear derailleur in the second largest cog and use MicroAdjust to line up the upper derailleur pulley with that cog. Watch How To Video
2. LINK UP
2x Drivetrains
Big chainring and big cog + one inner and one outer links (bypassing the rear derailleur). Watch How To Video
1x Drivetrains
Chainring and big cog + two inner and two outer links (bypassing the rear derailleur). Watch How To Video
Install the PowerLock
Visually inspect the chain inboard & outboard to confirm that the PowerLock pins are seated completely, and then lock it the easy way, without tools. Watch How To Video
3. MIND THE GAP
Front Derailleur
A) Check that you have a 0.5—1mm gap between the outer plate of the front derailleur cage and the chain when on the big ring and small cog combo. Watch How To Video
B) Check that you have a 0.5—1mm gap between the inner plate of the front derailleur cage and the chain when on the small ring and large cog combo. Watch How To Video
Rear Derailleur
Set rear derailleur B-gap using the supplied B-gap tool (don’t skip this step!) for the smoothest, fastest shifting setup. Watch How To Video
4. DIAL IT IN
A) Fine tune rear shifting using MicroAdjust. Watch How To Video
B) Fine tune front shifting with limit screws. Watch How To Video
C) Set brake lever fit with ReachAdjust. Watch How To Video
D) Set brake lever engagement with Contact Point Adjust (on disc brake models). Watch How To Video
Download the full eTap AXS User Manual here.
For more eTap AXS setup videos, visit the SRAM Tech YouTube Channel.